http://AKDINDUS.NET
ADHIAMTHERMAL 58633f908bf1620a045a5862 False 222 15
OK
background image not found
Found results for
'time minimized'
CIP Pump QAR   0 QAR  0
-NaN%

CIP Pump

Maintenance personnels frequently encounter the problem of build-up deposits on heat transfer surfaces in many applications . We do supply the complete CIP pump system as per the requirement of our customer. The CIP pump can be used for cleaning the equipments without opening the Unit. This can be used for plate heat exchanger, spiral heat exchanger , other welded heat exchanger and shell and tube heat exchangers. Concept : Connect the CIP unit to the heat exchanger Mix the cleaning chemicals in the tank and heat it up. Circulate the cleaning solution for few hours depends on the scale. Drain and rinse thoroughly with water Disconnect the CIP unit All scales shall be removed and the equipment is back to the designed performance. Principle: Complete or partial dissolving or destruction of the deposits due to the chemical reaction. Deposits are removed in the continuous re circulation. Features and Benefits: Connecting directly to the inlet and outlet. This avoids disassembly and assembly .Down time minimized and increases the gasket life in case of gasketted phe. Construction of Pump and tank and all other wetted parts are in AISI304 or as per the preference of customer . Fast cleaning due to the hot liquid . Heating element helps to heat the chemical in the tank. Temperature Indicator to check and plan the required temperature . Reverse direction circulation makes it possible to remove any deposits which is difficult to remove from the heat exchanger.

QAR 0 QAR 0

Availability:True

Pay mode:COD only

view details
Hydraulic Tightening device QAR   0 QAR  0
-NaN%

Hydraulic Tightening device

Capacity 13 - 95 ton Stroke 8 - 155 mm Center Hole Diameter 19,6 - 79,0 mm Max. Pressure 700 bar Easy to dismantle and Assemble plate pack of plate heat exchangers Less time duration to complete the assembly No possibility of misalignment of plates while assembly The tightening device shall consist of the following components : 60 Ton S/A Hollow Plunger Cylinder, Stroke: 76mm, Closed Height: 247mm Economy Pump, 3-Way Valve, Single Acting Max. operating pressure 700 bar Gauge Adaptor, 1/4" Gauge Port Pressure Gauge, Face Dia 2.5", 1/4" NPTF Thread, Range 0-10000 PSI 3/8" Hi-Flow Coupler consisting of CR400 female half & CH-604 male half 6 feet Hose, 3/8" NPTF, .25" I.D. with CH-604 Coupler 3/8" NPTF Manifold Valve, 4-Way Cylinder Half (Female) Coupler of C604 20 feet Hose, with CH-604, 3/8" NPTF, .25" I.D.

QAR 0 QAR 0

Availability:True

Pay mode:COD only

view details
1
false